Anicubic 4max 프린터 조건 설정!
View counts: 130 |
watermelon
|
Sept. 18, 2020, 4:56 p.m.
큐라 3.5부터는 보이는 것 같긴한데 볼륨 크기가 다르니, 수정해서 적용해야 됩니다.
참고하세요!
이렇게 생긴 녀석이에요

Printer Settings
Printhead Settings
Start G-Code
End G-Code
Extruder 1 Nozzle Settings
참고하세요!
이렇게 생긴 녀석이에요

Printer Settings
X (Width): 270mm Y (Depth): 205 mm Z (Height): 205 mm Build Plate Shape: Rectangular Origin at Center: Unchecked Heated Bed: Checked Heated Build Volume: Unchecked G-Code Flavor: Marlin |
Printhead Settings
X min: 0 Y min: 0 X max: 205 Y max: 205 Gantry Height: 25.0 Number of Extruders: 1 |
Start G-Code
G21 ;metric values G90 ;absolute positioning M82 ;set extruder to absolute mode M107 ;start with the fan off G28 X0 Y0 ;move X/Y to min endstops G28 Z0 ;move Z to min endstops G1 X-3 Y40 ;Anycubic 4Max Pro Brush G1 X-3 Y5 ;Anycubic 4Max Pro Brush G1 X-3 Y40 ;Anycubic 4Max Pro Brush G1 X-3 Y5 ;Anycubic 4Max Pro Brush G1 Z15.0 F{speed_travel} ;move the platform down 15mm G92 E0 ;zero the extruded length G1 F200 E3 ;extrude 3mm of feed stock G92 E0 ;zero the extruded length again G1 F{speed_travel} M117 Printing... G5 |
End G-Code
M104 S0 ; turn off extruder M140 S0 ; turn off bed M84 ; disable motors M107 G91 ;relative positioning G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure G1 Z+0.5 E-5 ;X-20 Y-20 F{speed_travel} ;move Z up a bit and retract filament even more G28 X0 ;Y0 ;move X/Y to min endstops, so the head is out of the way G1 Y180 F2000 M84 ;steppers off G90 M300 P300 S4000 |
Extruder 1 Nozzle Settings
Nozzle Size: 0.4 mm Compatible Material Diameter: 1.75 mm Nozzle Offset X: 0 mm Nozzle Offset Y: 0 mm Cooling Fan Number: 0 Extruder Start G-Code: Blank Extruder End G-Code: Blank |
Tags
Comments [0]
Studying
Title | 글쓴이 | Date | Count |
---|---|---|---|
꼭 알아야하는 G코드는?! |
![]() |
2020-10-06 | 139 views |
Anicubic 4max 프린터 조건 설정! |
![]() |
2020-09-18 | 129 views |
슬라이서 프로그램 비교!! |
![]() |
2020-08-06 | 404 views |